Correlative analysis of cervical curvature and atlantoaxial instability / 中国骨伤

OBJECTIVE@#To investigate the correlation between the changes of cervical curvature and atlantoaxial instability.@*METHODS@#The correlation between the changes of cervical curvature and atlantoaxial instability was retrospectively studied in 50 outpatients with abnormal cervical curvature (abnormal cervical curvature group) from January 2018 to December 2019. There were 24 males and 26 females in abnormal cervical curvature group, aged from 18 to 42 years old with an average of(30.62±5.83) years. And 53 patients with normal cervical curvature (normal cervical curvature group) during the same period were matched, including 23 males and 30 females, aged from 21 to 44 years with an average of(31.98±6.11) years. Cervical spine X-ray films of 103 patients were taken in lateral position and open mouth position. Cervical curvature and variance of bilateral lateral atlanto-dental space(VBLADS) were measured and recorded, Pearson correlation coefficient analysis was used to study the correlation between the changes of cervical curvature and atlantoaxial instability.@*RESULTS@#Atlantoaxial joint instability accounted for 39.6%(21/53) in normal cervical curvature group and 84.0%(42/50) in abnormal cervical curvature group. There was significant difference between two groups(P<0.01). VBLADS in abnormal cervical curvature group was (1.79±1.01) mm, which was significantly higher than that in normal cervical curvature group(0.55±0.75) mm(P<0.01). Pearson correlation coefficient analysis showed that the size of cervical curvature was negatively correlated with VBLADS.@*CONCLUSION@#Cervical curvature straightening and inverse arch are the cause of atlantoaxial instability, the smaller the cervical curvature, the more serious the atlantoaxial instability.

Correlation between cervical curvature and cervical disc bulging in young patients with neck pain / 中国骨伤

OBJECTIVE@#To explore the correlation between the curvature of the cervical spine and the degree of cervical disc bulging in young patients with cervical pain.@*METHODS@#The clinical data of 539 young patients with neck pain from January 2015 to December 2018 were retrospectively analyzed. There were 251 males and 288 females, aged 18 to 40 (32.2±6.3) years old. The cervical curvature and cervical disc bulging were measured by cervical X-ray and MRI. According to cervical curvature, the patients were divided into 175 cases of cervical lordosis group (cervical curvature > 7 mm), 163 cases of cervical erection group (0

Relationship between Cervical Curvature and Spinal Drift Distance after Laminectomy with Screw Fixation and Its Effect on Clinical Outcome / 中国康复理论与实践

Objective:To observe the relationship between cervical curvature and spinal drift distance after laminectomy with lateral mass screw fixation, and its effect on clinical outcome. Methods:From January, 2017 to October, 2018, a total of 117 patients with cervical spondylotic myelopathy (CSM) underwent laminectomy with lateral mass screw fixation, and 90 of them completed the follow-up. According to the patients' cervical curvature (CC), they were divided into three groups: those CC between 0° to 5° were in Group A (n = 28), 5° to 16.5° in Group B (n = 36) and CC > 16.5° in Group C (n = 26). The spinal drift distance, nerve recovery, axial symptoms and C5 palsy were recorded and analyzed. Results:There were significant differences in CC and spinal drift distance (F > 152.119,P < 0.001), and no significant difference was found in laminectomy width and incidence of C5 palsy (P > 0.05) among three groups. The Japanese Orthopaedic Association (JOA) score significantly increased in all the groups post operation and at the last follow-up (t > 8.869,P < 0.001), and no significant difference was found among there groups at the same time (P > 0.05), as well as the incidence of C5 palsy (F = 0.472,P = 0.625). There was significant difference in the score of Visual Analogue Scale of axial symptoms among three groups (F > 34.800,P < 0.001), which was lower in groups B and C than in group A (t > 5.845,P< 0.001), and no significant differene was found between group B and group C. Conclusion:On the basis of the same laminectomy width, the greater the CC was, the more favorable the spinal drift went backwards. The loss of CC was related to the occurrence of axial symptoms, but was not correlated with the neurological recovery and C5 palsy.

Effect of zero-profile and self-locking intervertebral cage and plate-cage construct on maintenance of cervical curvature after anterior cervical surgery / 中国修复重建外科杂志

Objective: To compare differences in the maintenance of cervical curvature after anterior cervical surgery between zero-profile and self-locking intervertebral cage and plate-cage construct (PCC). Methods: A clinical data of 100 patients with single-segment cervical disc herniation who were treated with anterior cervical discectomy and fusion were retrospectively analyzed between January 2015 and January 2016. Among them, 50 patients were treated with the zero-profile and self-locking intervertebral cage (group A) and 50 patients with the PCC (group B). There was no significant difference between the two groups in age, gender, bone mineral density, disease duration, operative segment, and preoperative visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height ( P>0.05). The operation time and intraoperative blood loss were recorded. The postoperative VAS and JOA scores were used to evaluate the clinical efficacy. The C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height were measured on lateral X-ray films, and the interbody fusion was evaluated according to Pitzen's criteria. Results: The operation time in group A was significantly shorter than that in group B ( t=2.442, P=0.021), but there was no significant difference in the intraoperative blood loss between the two groups ( t=0.812, P=0.403). All patients were followed up 24-36 months, with an average of 28.5 months. According to Pitzen's criteria for cervical interbody fusion, bone fusion achieved in both groups. The VAS score, JOA score, C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height of the two groups at 1 and 24 months after operation were significantly improved when compared with those before operation ( P0.05). There were significant differences in C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height between the two groups at 24 months after operation ( P0.05). Conclusion: Compared with the PCC, the zero-profile and self-locking intervertebral cage can significantly shorten the operation time and obtain the same clinical efficacy, but the intervertebral height loss and secondary cervical curvature change after operation is more serious.

Comparison of cervical motion range and curvature after C3 laminectomy and mini-titanium plate fixation after single-door vertebroplasty / 中国组织工程研究

BACKGROUND: Axial symptoms often occur in patients after posterior cervical single-door vertebroplasty. Some studies have proposed a modified surgical method to remove C3 lamina and retain cervical semisacinous muscle on C2 spinous to reduce the occurrence of axial symptoms after surgery. OBJECTIVE: To compare the clinical effects, cervical motion range and curvature of C3 laminectomy and mini-titanium plate fixation after single-door vertebroplasty. METHODS: Totally 43 patients with cervical spondylosis were selected from the General Hospital of Southern Theater Command of PLA from June 2012 to June 2017, including 25 males and 18 females. Among them, 27 patients underwent C3-6 or C3-7 single-door mini-titanium fixation vertebroplasty as fixation group and 16 patients underwent C4-6 or C4-7 single-door mini-titanium fixation vertebroplasty through posterior approach after C3 laminectomy as resection group. Preoperatively, 6 months postoperatively and at final follow-up, JOA score, cervical motion range, and C2-7 Cobb angle were compared between the two groups. This study was approved by the Ethics Committee of General Hospital of Southern Theater Command of PLA. RESULTS AND CONCLUSION: (1) All 43 patients successfully underwent the operation without vascular or spinal cord injury. (2) JOA score was higher in the two groups at postoperative 6 months and final follow-up than that preoperatively (P 0.05). (3) Motion range in the two groups was smaller at postoperative 6 months and final follow-up than that preoperatively (P < 0.05). Motion range was smaller in the fixation group than in the resection group at postoperative 6 months and final follow-up (P < 0.05). (4) C2-1 Cobb angle in the two groups was smaller at postoperative 6 months and final follow-up than that preoperatively (P < 0.05). C2-7 Cobb angle was smaller in the fixation group than in the resection group at postoperative 6 months and final follow-up (P < 0.05). (5) There was no hypersensitivity, rejection or immune response in the two groups. (6) Results indicate that C3 laminectomy and mini-titanium plate fixation have the same effect on improving neurological function, but the removal of C3 lamina can more effectively prevent the reduction of postoperative cervical motion range and curvature.

Application of 3d printed interbody fusion cage for cervical spondylosis of spinal cord type: Half-year follow-up of recovery of cervical curvature and intervertebral height / 中国组织工程研究

BACKGROUND: Recent clinical studies have found that during the implantation of biomaterials, the internal environment of the body will change to a certain extent, and different levels of immunity and stress responses will occur. There are also obvious differences in the immune and stress responses of different biological materials. OBJECTIVE: To investigate the effect of 3D printed interbody fusion cage on patients with cervical spondylosis of spinal cord type and its effect on serum cortisol and norepinephrine levels. METHODS: Sixty-three patients with cervical spondylotic myelopathy who were admitted to the Affiliated Hospital of Chengde Medical University from July 2015 to July 2018 were selected, including 40 males and 23 females, aged 30-78 years old. The patients were randomly divided into a research group (n=31) and a control group (n=32) according to a random number table. All patients received anterior cervical decompression and bone graft fusion and internal fixation. Patients in the research group were implanted with 3D printed intervertebral fusion cage during operation. The patients in the control group were implanted with polyetheretherketone interbody fusion cage and allogeneic bone. The operation and complications of the two groups were compared. Serum cortisol and norepinephrine levels were detected before and 1 and 3 days after operation. Cervical curvature and intervertebral height were measured before surgery, 1 week, and 6 months after surgery. Axial symptoms were counted at 6 months after surgery. The trial was approved by the Ethics Committee of the Affiliated Hospital of Chengde Medical University. RESULTS AND CONCLUSION: (1) Operation time, intraoperative blood loss and hospitalization time were not significantly different between the two groups (P > 0.05). (2) Among 31 cases, there were 1 case of screw loosening and 1 case of implant movement in the research group. Among 32 cases, there were 3 cases of screw loosening, 3 cases of immune rejection, 2 cases of implant movement, and 1 case of implant collapse in the control group. The incidence of complications was lower in the research group than that in the control group (P < 0.05). (3) At 1 and 3 days after operation, the levels of cortisol and norepinephrine were higher in both groups than those before surgery (P < 0.05), but above levels were lower in the research group than in the control group (P < 0.001). (4) The cervical curvature and intervertebral height at 1 week and 6 months after operation in both groups were higher than those before surgery (P < 0.05), and above indexes were higher in the research group than in the control group (P < 0.05). (5) The axial symptom in the research group was lighter than that in the control group at 6 months after operation (P < 0.05). (6) The results show that the application of 3D printed interbody fusion cage to cervical spondylotic myelopathy can reduce complications, promote the recovery of cervical curvature and intervertebral height, and improve the stability of cervical spine, and the body’s stress response and axial symptoms are mild.

Correlation analysis of preoperative T 1 slope in MRI and physiological curvature loss after expansive open-door laminoplasty / 中国修复重建外科杂志

Results: The C 2-C 7 Cobb angle at last follow-up was significantly decreased when compared with preoperative value ( t=8.000, P=0.000), but there was no significant difference in C 2-C 7 SVA between pre- and post-operation ( t=-1.842, P=0.074). The preoperative T 1S was (19.69±3.39)°; there were 17 cases in group A and 19 cases in group B with no significant difference in gender and age between 2 groups ( P>0.05). The preoperative C 2-C 7 Cobb angle in group B was significantly lower than that in group A ( t=-2.150, P=0.039), while there was no significant difference in preoperative C 2-C 7 SVA between 2 groups ( t=0.206, P=0.838). At last follow-up, except for the curvature loss after operation in group B was significantly lower than that in group A ( t=-2.723, P=0.010), there was no significant difference in the other indicators between 2 groups ( P>0.05).

Correlation analysis between position of head, cervical curvature classification and balance of cervical spine through lateral plain radiograph measurement / 中国骨伤

<p><b>OBJECTIVE</b>To analyze the relationship between position of head, cervical curvature type and associated cervical balance parameters in a neutral looking-forward posture.</p><p><b>METHODS</b>Cervical lateral X-rays of 60 patients with cervical spondylosis were selected from January to December 2015. There were 22 males and 38 females with an average age of (35.5±10.9) years old. The measured parameters included cervical curvature type, McGregor slope, C2 lower end plate slope, T1 slope, center of gravity to C7 sagittal vertical offset (CG-C7 SVA), and C2 to C7 sagittal vertical offset (C2-C7 SVA). The parameters were analyzed using Spearman correlation.</p><p><b>RESULTS</b>The cervical curvature type was significantly correlated with C2 lower endplate slope, C0-C2 angle (total degree of C2 lower endplate slope plus McGregor slope), CG-C7 SVA and T1 slope (<0.05), but it was not significantly correlated McGregor slope (>0.05). C2 lower endplate slope and C2-C7 SVA (r=0.87) were significantly (<0.05) correlated with CG-C7 SVA (<0.05).</p><p><b>CONCLUSIONS</b>There was certain some relationship among position of head, cervical curvature type and associated cervical balance parameters in a neutral looking-forward posture. The center of gravity of the head would backwards shift following faced upward. A position of extension with posterior-shifting of the head would suggest that it may be accompanied with a relatively normal lordosis of the cervical spine. Some patients with abnormal curvature showed slightly bended head in the natural posture. Health education toward these people would be meaningful to restore the balance of their neck.</p>

Biomechanical effects of interbody cage height on cervical spine / 医用生物力学

Objective To investigate the biomechanical effects of interbody cage height on cervical spine during anterior cervical discectomy and fusion (ACDF) surgery,so as to provide references for selection of interbody cage.Metheds The finite element model of normal cervical spine (C2-7) was built and validated,and the cages with different height (5,6,7,8 mm) were implanted into C5-6 disc (cage 5,6,7,8 model).All the models were loaded with pure moment of 1.5 N · m to produce flexion,extension,lateral bending and axial rotation motions on cervical spine,and the effects of cage height on range of motion (ROM),facet joint stress,intervertebral pressure in cervical spine were investigated.Results The intervertebral angle at the fusion segment increased by 0.68° with per 1 mm-increase in height.The ROM in C5-6 after cage implantation was smaller than 0.44°.The influence of cage height on ROM in C4-5 was greater than that in C6-7,and the changes of ROM in non-fusion segments were smaller than 7.3％.The cage height variation had a smaller impact on the facet joint stress and intervertebral pressure.The stresses in the capsular ligament,cage and screw-plate system increased gradually with the increase of cage height,and the stresses in cage 6,7,8 models were much higher than those in cage 5 model.Conclusions For patients who need implanting fusion cage,the cage height should be 0-1 mm greater than the original intervertebral space height.

Biomechanical effects of interbody cage height on cervical spine / 医用生物力学

Objective To investigate the biomechanical effects of interbody cage height on cervical spine during anterior cervical discectomy and fusion (ACDF) surgery,so as to provide references for selection of interbody cage.Metheds The finite element model of normal cervical spine (C2-7) was built and validated,and the cages with different height (5,6,7,8 mm) were implanted into C5-6 disc (cage 5,6,7,8 model).All the models were loaded with pure moment of 1.5 N · m to produce flexion,extension,lateral bending and axial rotation motions on cervical spine,and the effects of cage height on range of motion (ROM),facet joint stress,intervertebral pressure in cervical spine were investigated.Results The intervertebral angle at the fusion segment increased by 0.68° with per 1 mm-increase in height.The ROM in C5-6 after cage implantation was smaller than 0.44°.The influence of cage height on ROM in C4-5 was greater than that in C6-7,and the changes of ROM in non-fusion segments were smaller than 7.3％.The cage height variation had a smaller impact on the facet joint stress and intervertebral pressure.The stresses in the capsular ligament,cage and screw-plate system increased gradually with the increase of cage height,and the stresses in cage 6,7,8 models were much higher than those in cage 5 model.Conclusions For patients who need implanting fusion cage,the cage height should be 0-1 mm greater than the original intervertebral space height.

Biomechanical effects of interbody cage height on cervical spine / 医用生物力学

Objective To investigate the biomechanical effects of interbody cage height on cervical spine during anterior cervical discectomy and fusion (ACDF) surgery, so as to provide references for selection of interbody cage. Methods The finite element model of normal cervical spine (C2-7) was built and validated, and the cages with different height (5, 6, 7, 8 mm) were implanted into C5-6 disc (cage5, 6, 7, 8 model). All the models were loaded with pure moment of 1.5 N•m to produce flexion, extension, blending and axial torsion motions on the cervical spine, and the effects of cage height on range of motion (ROM), facet joint stress, intervertebral pressure in cervical spine were investigated. Results The intervertebral angle at the fusion segment increased by 0.68°with per 1 mm-increase of height. The ROM at C5-6 after cage implantation was less than 0.44°. The influence of cage height on ROM in C4-5 was greater than that in C6-7, and the changes of ROM in non-fusion segments were less than 7.3%. The cage height variation had a smaller impact on the facet joint stress and intervertebral pressure. The stresses in the capsular ligament, cage and screw-plate system increased gradually with the increase of cage height, and these stresses in the cage6, 7, 8 models were much higher than those in the cage5 model. Conclusions For patients who need implanting fusion cage, the cage height should be 0-1 mm greater than the original intervertebral space height.

Biomechanical effects of interbody cage height on cervical spine / 医用生物力学

Objective To investigate the biomechanical effects of interbody cage height on cervical spine during anterior cervical discectomy and fusion (ACDF) surgery,so as to provide references for selection of interbody cage.Metheds The finite element model of normal cervical spine (C2-7) was built and validated,and the cages with different height (5,6,7,8 mm) were implanted into C5-6 disc (cage 5,6,7,8 model).All the models were loaded with pure moment of 1.5 N · m to produce flexion,extension,lateral bending and axial rotation motions on cervical spine,and the effects of cage height on range of motion (ROM),facet joint stress,intervertebral pressure in cervical spine were investigated.Results The intervertebral angle at the fusion segment increased by 0.68° with per 1 mm-increase in height.The ROM in C5-6 after cage implantation was smaller than 0.44°.The influence of cage height on ROM in C4-5 was greater than that in C6-7,and the changes of ROM in non-fusion segments were smaller than 7.3％.The cage height variation had a smaller impact on the facet joint stress and intervertebral pressure.The stresses in the capsular ligament,cage and screw-plate system increased gradually with the increase of cage height,and the stresses in cage 6,7,8 models were much higher than those in cage 5 model.Conclusions For patients who need implanting fusion cage,the cage height should be 0-1 mm greater than the original intervertebral space height.

Analysis of Curative Effect of Posterior Cervical Pedicle Screw Fixation Operation for Cervical Spondylotic Myelopathy / 沈阳医学院学报

Objective:To evaluate the clinical effect of posterior cervical pedicle screw fixation operation for cervical spondylotic myelopathy.Methods: From Mar 2014 to Sep 2015, 55 patients with cervical spondylotic myelopathy treated with posterior cervical pedicle screw fixation operation were involved. Cervical curvature in the cervical three dimensional CT by the Harrison’ s cervical curvature measuring method was measured, and JOA scores, NDI scores and VAS scores before and after operation and the last follow-up were evaluated. Results:A total of 55 patients with cervical spondylotic myelopathy obtained good operation effect and the cervical curvature and neural function were improved.The cervical curvature, JOA score, NDI scores, and VAS scores were significantly better than that before operation (P < 0.05) . Last follow-up results showed that there was statistical significance on JOA score, NDI score, and VAS score compared with that after operation (P<0.05), but not on cervical curvature (P>0.05) . Conclusion:The neurological function and cervical curvature of the cervical spondylotic myelopathy can be improved through posterior cervical pedicle screw fixation operation.

Analysis of pathogenic factors for C5 palsy after open-door laminoplasty / 天津医药

Objective To discuss the risk factors of C5 never palsy incidence after cervical open-door laminoplasty. Methods This study involved 254 patients with cervical spondylotic myelopathy, who underwent expansive open-door lam?inoplasty in our hospital between January 2009 and December 2012. Patients were divided into two groups according to the incidence of C5 palsy after operation. Group A included 20 patients with C5 palsy and group B included 234 cases without C5 palsy. The risk factors for postoperative C5 palsy were compared between two groups. The factors may affect the inci?dence of C5 palsy were analyze. Results All cases received follow-up with an average follow-up time (24.9±2.6) months. Values of cervical curvature index (CCI), lamina open angles and spinal cord shift were significantly greater in group A than those of group B (P0.05). Results of Logistic regres?sion analysis of multiple factors showed that lamina open angles, the pathogenic factors of C5 palsy included the spinal cord shift and postoperative CCI [OR(95%CI):2.035(1.684-2.359), 3.542 (2.465-9.254) and 9.126(4.425-17.273). Conclusion The angle of open door too large, CCI and spinal cord shift are risk factors for postoperative C5 palsy.

CLINICAL OBSERVATION OF POSTERIOR CERVICAL DECOMPRESSIVE LAMINECTOMY AND LATERAL MASS SCREW FIXATION COMBINED WITH FORAMINOTOMY FOR CERVICAL RADICULO-MYELOPATHY / 中国修复重建外科杂志

METHODS: Between January 2010 and January 2012, 58 patients with cervical radiculo-myelopathy were treated by posterior cervical decompressive laminectomy and lateral mass screw fixation combined with foraminotomy. There were 31 males and 27 females, with an average age of 52.7 years (range, 41-72 years). The mean disease course was 5.4 years (range, 3-15 years). The preoperative Japanese Orthopaedic Association (JOA) score was 7.8±1.3, and visual analogue scale (VAS) score was 6.8±1.7. There were 37 cases of inter-vertebral disc herniation and ligamentum flavum hypertrophy, 11 cases of vertebral osteophyte formation with the osteophyte spinal canal occupational ratio of 51.7%±18.1%, and 10 cases of inter-vertebral disc herination with cervical instability. Preoperative cervical curvature was (-5.5±12.5)°. The fixed segments included C3-7 in 29 cases, C4-7 in 19 cases, and C3-6 in 10 cases. Foraminotomy was performed in 135 nerve foramina (mean, 2.33 foramina).

Evaluation of cervical posture of adolescent subjects in skeletal class I, II, and III / Evaluación de la postura cervical en sujetos adolescentes con clase esqueletal I, II y III

The aim of this study was to investigate whether there are significant differences in cervical posture in adolescent subjects with a different skeletal class. Twenty-eight adolescent subjects (21 boys and 7 girls, average age of 13.6 years, SD+/-3.2) who were admitted for orthodontic treatment were included in this study. Selection criteria were as follows: no previous orthodontic, orthopaedic, or surgical treatment and absence of facial asymmetry, bruxism, nasal obstruction, orofacial pain, and temporomandibular joint dysfunction. Lateral skull radiographs were taken, and the subjects were divided into three groups based on their skeletal class according to ANB angle and Wits appraisal. The cephalometric tracings included cervical postural variables and cervical curvature. By Pearson´s correlation analysis (using the variables as continuous), we found a high linear relationship between the variables angle ANB and Wits appraisal (0.7895) and between cervical curvature and C0-C1 distance (0.6384). Statistical significance was observed between ANB angle and cervical curvature (p = 0.039) and C0-C1 distance (p = 0.045) variables, whereas Wits appraisal showed no significant association with any study variable (p > 0.05). The cervical curvature was different between the groups; however, both averages turned out to have more characteristics of rectified cervical, being female clearly the most affected, as well as an average lower than the standard posterior-inferior angle, which shows a more posterior rotation of the skull. The cervical posture seems to be strongly associated with the sagittal posture as well as the vertical structure of the face, with these data being complementary to other determinants of craniofacial growth and development.

El objetivo de este estudio fue investigar si existen diferencias significativas en la postura cervical de pacientes adolescentes con diferente clase esqueletal. Veintiocho adolescentes (21 hombres y 7 mujeres, edad promedio 13,6 años, DE+/-3,2) fueron admitidos para este estudio y el tratamiento de ortodoncia. Fueron seleccionados sujetos sin antecedentes de tratamiento ortodóncico, ortopédico o quirúrgico previo, asimetría facial, bruxismo, obstrucción nasal, dolor orofacial y disfunción de la articulación temporomandibular. Para cada caso se tomaron radiografías laterales de cráneo y los sujetos fueron divididos en tres grupos basados en su clase esqueletal según el ángulo ANB y la evaluación de Wits. Los trazados cefalométricos incluyeron las variables postural cervical y curvatura cervical. Mediante el análisis de correlación de Pearson (usando las variables como contínuas), se encontró una alta relación lineal entre las variables ángulo ANB y evaluación de Wits (0,7895) y entre curvatura cervical y la distancia C0-C1 (0,6384). Se observó significancia estadística entre el ángulo ANB y las variables curvatura cervical (p=0,039) y distancia C0-C1 (p=0,045), mientras que la evaluación de Wits no mostró una asociación con las variable de estudio (p>0,05). La curvatura cervical fue diferente entre las clases esqueletales, sin embargo, ambos promedios resultaron tener rectificación cervical, siendo las mujeres claramente más afectadas, junto con un promedio menor del ángulo postero-inferior en relación al estándar, lo que muestra una rotación más posterior del cráneo. La postura cráneocervical parece estar fuertemente asociada con la postura sagital, así como la estructura vertical de la cara, siendo estos datos complementarios a otros determinantes del crecimiento y desarrollo craneofacial.

Clinical observation of the therapeutic effect of spine fine adjusting in treating cervical spondylotic radiculopathy and the conversion of cervical curvature / 中华中医药杂志

Objective:Discuss and analyze the mechanisms of spine fine adjusting through the observation of the therapeutic effect in treating cervical spondylotic radiculopathy(CSR)and the conversion of cervical curvature.Methods: Randomly divide 106 CSR patients into two groups–manipulation therapy group and traction therapy group,53 for each.Judge the therapeutic effect by evaluation scales and measure the cervical curvature on X-ray photographs.Results:The symptoms and physical signs of the patients in both two groups have been improved(P

Classifications and Manipulation of the Abnormality of Cervical Curvature / 中国康复理论与实践

@#ObjectiveTo analyze the classifications of the abnormalities of cervical curvature and its treatments with manipulation. Methods209 patients with cervical lordosis were analyzed. The abnormalities of the cervical curvature were classified as over-curvature (>45°), hypo-curvature (0°～30°), the straightened cervix (0°), backward curvature(0°～―20°), multiple curvatures (the cervical curvature showed "S" shaped). The C_5 subluxation were restored with manipulation in patients with hypo-curvature and straightened cervix, or other vertebra subluxation in multiple curvatures. Results1~4 yeared follow-up, 127 cases were excellently well being, 59 were well being, 23 were improved.ConclusionManipulation is effective on abnormalities of cervical curvature.